Sr. No |
Name of the examination |
Institute/University |
Year of passing |
Specialization |
1 |
B.E.
Mechanical |
B.V.M.
Engineering College, Vallabh Vidyanagar |
1994 |
Mechanical
Engineering |
2 |
M.
E. Mechanical |
Faculty
of Technology and Engineering, |
2009 |
Jet
Propulsion & Gas Turbine Plants |
3 |
Ph.D. |
Sardar
Vallabhbhai National Institute of Technology, Surat |
2020 |
Inverse
Diffusion Flame |
Sr.
No. |
Name of the organization |
Designation |
Duration |
1 |
Eimco Elecon |
Apprentice Engineer |
01/11/1994
to 31/10/1995 |
2 |
Dr.
Jivraj N Mehta Government Polytechnic, Amreli |
Ad-hoc
Lecturer in
Mech. Engg. |
10/07/1998
to 21/01/2001 |
3 |
Government
Polytechnic, Valsad |
Ad-hoc
Lecturer in
Mech. Engg. |
22/01/2011
To 07/03/2005 |
4 |
Government
Polytechnic, Valsad |
Lecturer
in
Mech. Engg. |
07/03/2005
To 15/04/2005 |
5 |
Shri
K. J Polytechnic, Bharuch. |
Lecturer
in
Mech. Engg. |
16/04/2005
To 30/04/2011 |
6 |
GEC,
Bharuch |
Assist
Prof. in
Mech. Engg |
30/04/2011
To till date |
Sr. No. |
Year |
Place |
Duration |
Subject/Title |
1 |
2005 |
NITTTR, Bhopal |
09-05-2005 To 20-05-2005 |
Developing
Teaching Competencies, Phase -1 |
2 |
2005 |
NITTTR, Bhopal |
23-05-2005 To 03-06-2005 |
Developing Teaching Competencies, Phase -2 |
3 |
2005 |
ABC Bearings LTD, Bharuch |
15-10-2005 To 14-11-2005 |
Industrial Training |
4 |
2010 |
B & B Institute of technology, Vallabh Vidyanagar |
04-01-2010 To 08-01-2010 |
Modern Computing Techniques in Mechanical Engineering |
5 |
2010 |
B & B Institute of Technology, Vallabh Vidyanagar |
14-06-2010 To 25-06-2010 |
Recent Advances in Pedagogy |
6 |
2011 |
Dr. S. & S. S. Gandhi College of
Engineering & Technology, Surat |
10-01-2011 To 21-01-20112010 |
Advanced AutoCAD-2010 |
7 |
2014 |
NITTTR, Bhopal |
16-06-2014 To 20-06-2014 |
CATIA Basics |
8 |
2015 |
NITTTR, Bhopal |
16-03-2015To 27-03-2014 |
Environmental pollution, Analysis and
Treatment |
9 |
2019 |
GEC-Bharuch |
03-06-2019 To 15-06-2019 |
Recent Trends in I C Engine |
10 |
2020 |
SWAYM MOOC |
14-09-2020 To014-12-2020 |
Accreditation of Undergraduate Engineering Programs |
11 |
2020 |
I-HUB |
06-07-2020 To 14-09-2020 |
Intellectual Properties Rights |
Sr. No. |
Year |
Place |
Duration |
Subject/Title |
1 |
2020 |
GEC-Bharuch |
01-07-2020 To 03-07-2020 |
ANSYS Mechanical & ANSYS CFD |
Sr. No |
Title |
Name of
Journal/Conference |
Vol./Year/Page No. |
1 |
Part load performance assessment
of single shaft gas turbine in cogeneration cycle mode |
International Journal of Advance
Research in Engineering, Science & Technology |
Volume 2, Issue 4,
April-2015. |
2 |
Evaluation of output and heat rate of the simple cycle gas turbine
during the base load condition |
International Journal
of Advance Research in Engineering, Science & Technology |
Volume 2, Issue 4,
April-2015 |
3 |
Effect of different web openings in narrow flange I-section beam |
International Journal
of Engineering Research & Technology |
Vol. 2, Issue 11,
November-2013 |
4 |
Automatic rain operated wiper system in automobile: a review |
International Journal
for Scientific Research & Development |
Vol. 3, Issue 2, 2015 |
5 |
A case study on tyre retreading of S. T. Workshop |
International Journal
for Scientific Research & Development |
Vol. 3, Issue 2, 2015 |
6 |
Effect of ambient temperature on the performance of gas turbine with
cogeneration system |
International Journal
of Advance Engineering and Research Development |
Volume 4, Issue 4,
April-2017 |
7 |
Experimental and numerical investigation of LPG fuelled inverse
diffusion flame in a coaxial burner |
International Journal
of Advanced Thermofluid Research |
Vol. 3, No. 1, 2017 |
8 |
Experimental investigation on ?ame appearance and emission
characteristics of LPG inverse di?usion ?ame with swirl |
Applied Thermal
Engineering |
Vol. 133, March-2018 |
9 |
Effect of swirl and number of swirler vanes on combustion
characteristics of methane inverse
diffusion flame |
Journal of Mechanical
Science and Technology |
Vol. 33 (4) January-2019 |
10 |
Analysis of LPG diffusion flame in tube type burner |
Journal of Mechanical
Engineering and Sciences |
Volume 13, Issue 3,
September-2019 |
11 |
Effect of hydrogen enrichment on combustion characteristics of methane
swirling and non-swirling inverse diffusion flame |
International Journal
of Hydrogen Energy |
Volume 44, September-2019 |
12 |
Design and development of luggage wrapping machine with facility of
sanitization |
International Journal
of Advance Research and Innovative Ideas in Education |
Volume 7, Issue 3, 2021 |
Nil
Sr. No. |
Project Title |
Amount Sanctioned and duration |
Funding Agency |
1 |
Experimental
investigation of appearance, thermal and emission characteristics of methane
inverse diffusion flame with circumferentially arranged coaxial air-fuel
ports” |
1.95 Lacs (April 2021 to March 2023) |
Promotion Under Technical
Education-STEM |
Sr. No. |
Topic |
Name of STTP |
Date |
1 |
Combustion
Characteristics of Biological Produced Methane |
Recent Development in Renewable
Energy |
08/04/2021 |