Faculty Details
Prof. S. B. Dikshit
Assistant Professor,
Mechanical Engineering Department
Qualification: BE Mechanical, M.Tech Turbomachines,
Area of Interest: Thermal and Fluid Science and Turbomachines
Email : saurabhdikshit@outlook.in
Education Qualification
- B. E. Mechanical Engineering from Hemchandracharya North Gujarat Univertisy with 60.09 % during 2000 - 2004
- M. Tech Mechanical (Turbomachines) from S. V. National Insititute of Technology, Surat with 8.03 CGPA during 2006- 2008
- Persuing Ph. D. from CHARUSAT University, Changa
Work Experience
Teaching Experience
- Teaching Assistant in Mechanical Engineering
Department at S. V. National Institute of Technology, Surat (Deemed University) from 24th January 2005
to 30th June,
2005.
- Teaching Assistant in Mechanical Engineering
Department at S. V. National Institute of Technology, Surat (Deemed University) from 18th July, 2005 to
30th June, 2006.
- Lecturer/Assistant Professor in Mechanical
Engineering Department of C. K. Pithawala College of Engineering and
Technology, Surat since 1st December, 2008 to 9th May,
2011.
- Presently
working as Assistant Professor in Mechanical Engineering Department of
Government Engineering College, Surat
since 10th May, 2011.
Skill and Knowledge
Knowledge
- Mechanical Engineering
- Turbomachines
Tools and Technology
Language
- Gujarati (Read, Write and Speak)
- Hindi (Read, Write and Speak)
- English (Read, Write and Speak)
Course Taught
- B. E. 1st Year: Elements of Mechanical Engineering
- B. E. 2nd Year: Engineering Thermodynamics, Fluid Mechanics
- B. E 3rd Year: Heat Transfer, Internal Combustion Engine
- B. E. 4th Year: Oil Hydraulics and Pnumetics, Vehicle Dynamics, Automobile Engineering
Training and Workshop
· Attended Induction Training Program Phase I at
NITTTR, Bhopal Extension Centre – Ahmedabad, during August 19 – August 31,
2013.
· Attended Training Program on “Special Program
for Commissioner Technical Education” held at Secretariat Training Centre,
SPIPA, Gandhinagar during June 9 – 13, 2014.
· Attended Faculty Development Program on “Entrepreneurship
Development” held at Centre for Entrepreneurship Development, Gandhinagar
during January 25 – February 6 2016.
· Attended Induction Training Program Phase II at
NITTTR, Bhopal during March 7 – 18, 2016.
· Attended Short Term Training Program on “Essentials
for NX Designers” held at Centre of Excellence of Dr. S. & S. S. Ghandhy
Government Engineering College, Surat during May 30 – June 4, 2016.
· Attended QIP Short Term Training Program on
“Advances in Theory and Design of Turbomachines” held at Mechanical Engineering
Department of S. V. National Institute of Technology, Surat during, November 7
– 12, 2016.
· Attended Short Term Training Program on
“Development of Teaching Learning Resources Using Digital Media” at NITTTR,
Bhopal during November 21 - December 2, 2016.
· Attended
Short Term Training Program on “Industrial Safety and Disaster Management” at
NITTTR, Bhopal during October 30 November 3, 2017.
Portfolios
- GTU Cocordinator
- Incharge of Establishment Section
Publications
International Journal: 08
- Digvijay Kulshreshtha, Dr. S. A. Channiwala, Mr.
Kamlesh Chaudhari & Mr. Saurabh Dikshit, “Experimental Investigations on
Axial Temperature Profiles, Liner Wall Temperature Distribution and Exit Gas
Temperature Distribution at Different Equivalence Ratios of A Tubular Type Gas
Turbine Combustors”, International Journal of Applied Engineering Research, Vol. 4, No. 3, pp. 421 – 434, 2009. ISSN No: 0973 – 4562
- Digvijay Kulshreshtha, Dr. S. A. Channiwala
& Mr. Saurabh Dikshit, “Design, Numerical Simulation and Experimental
Investigations on Can-Annular Type Combustion Chamber for 20 kW Gas Turbine
Engine”, International Journal of Dynamics of Fluids, Vol. 4, No.2, pp. 175 – 189, 2008.
- Dr. Digvijay Kulshreshtha, Dr. S. A. Channiwala
& Mr. Saurabh Dikshit, “Design Methodology and Development of Pressure
Swirl Atomizer for Micro Gas Turbine Combustion Chamber”, International Journal
of Applied Engineering Research, Vol. 4.
No. 10, pp. 1921 – 1929, 2009. ISSN No: 0973 – 4562
-
Dr. Digvijay Kulshreshtha, Saurabh Dikshit &
Dr. S. A. Channiwala, “Variations of Spray Cone Angle and Penetration Length of
Pressure Swirl Atomizer Designed for Micro Gas Turbine Engine” International
Journal of Dynamics of Fluids, Vol. 5,
No.2, pp. 165 – 172, 2009. ISSN No:
0973 - 1784
- Dr. Digvijay Kulshreshtha, Dr. S. A. Channiwala
& Mr. Saurabh Dikshit, “Exergy
Analysis of a Coal Based Thermal Power Plant”, International Journal of
Applied Engineering Research, Vol. 5,
No. 13, pp. 2241 – 2252, 2010. ISSN: 0973 – 4562
- Dr. Digvijay Kulshreshtha, Dr. S. A. Channiwala
& Mr. Saurabh Dikshit, “Uncertainties
in Temperature Measurement using Thermocouple in Gas Turbine Combustion Chamber”,
International Journal of Applied Engineering Research, Vol. 5, No. 16, pp. 2747 – 2754, 2010. ISSN: 0973 – 4562
- Mr. J. J. Bhavsar, Mr. Saurabh Dikshit & Mr.
V. K. Matawala, “ Performance Analysis of Spiral Tube Heat Exchanger”,
International Journal of Engineering and Advance Technology, Bhopal 2013,
ISSN: 2249: 8958
- Mr. Saurabh Dikshit, Dr. Digvijay Kulshreshtha
& Dr. S. A. Channiwala, “Numerical Analysis and Empirical Correlations to
predict SMD of Pressure Swirl Atomizer for Small Scale Gas Turbine Combustion
Chamber”, International Journal of Applied Engineering Research, Vol. 5, No. 13, pp. 2241 – 2252, 2018. ISSN:
0973 – 4562.
National Journal: 05
- TE-152 Vol. 92
July 2011.Dr. Digvijay
Kulshreshtha, Saurabh Dikshit & Dr. S. A. Channiwala, “Design Methodology
of Pressure Swirl Atomizer, Spray Characterization and Drop Diameter Evaluation
using Scanning Electron Microscope for Micro Gas Turbine Engine”, Institute of
Engineers Journal of Mechanical Engineering.
- Mr. Saurabh Dikshit,
Dr. Digvijay Kulshreshtha & Dr. S. A. Channiwala, “Numerical Predictions of
Internal Flow through Pressure Swirl Atomizer”, Indian Journal of
Science and Technology. Vol. 4, No. 2,
pp. 72 - 75, 2011. ISSN: 0974 – 6846. - Dr. Digvijay
Kulshreshtha, Mr. Saurabh Dikshit & Dr. S. A. Channiwala, “Experimental
Investigations of Air Assisted Pressure Swirl Atomizer”, Indian Journal of
Science and Technology. Vol. 4, No. 2, Vol. 4, No. 2, pp. 126 - 130, 2011. ISSN: 0974 – 6846.
- Dr. Digvijay Kulshreshtha, Mr. Saurabh Dikshit
& Dr. S. A. Channiwala, “Flow Simulations Through Micro Annular Combustion
Chamber: Iso-Thermal Swirling Flows” ISST Journal of Mechanical Engineering, Paper Submitted
- Mr. Saurabh Dikshit,
Dr. Digvijay Kulshreshtha & Dr. S. A. Channiwala, “Factors Affecting Spray
Cone Angle of Pressure Swirl Atomizer for Gas Turbine Combustion Chamber:
Theoretical and Experimental Analysis”, Indian Journal of Science and Technology. Vol.
4, No. 2, pp. 72 - 75, 2011.
ISSN: 0974 – 6846
International Conference: 07
- Digvijay Kulshreshtha, Dr. S. A. Channiwala,
Jitendra Chaudhary, Hitesh Solanki, Zoeb Lakdawala & Saurabh Dikshit,
“Effect of Divergence Angle on Flow Through Diffuser of A Gas Turbine
Combustor: A CFD Approach” Proceedings of
2nd ASME Joint US – European Fluid Engineering Summer Meeting
Collocated with 14th International Conference in Nuclear Engineering:
6th Symposium on Applications in Computational Fluid Dynamics, FEDSM2006-98068, Vol. 1, Part A, pp. 185 –
192, ISBN: 0 – 7918 – 4750 – 0, Miami Florida, US.
- Digvijay Kulshreshtha, Dr. S. A. Channiwala
& Mr. Saurabh Dikshit, “Numerical Simulation of Tubular Type Gas Turbine
Combustion Chamber: A CFD Approach”, Proceedings
of ASME International Mechanical Engineering Congress and Exposition: Power,
Fuels and Combustion, IMECE2006 –
13185, pp. 189 – 195, ISBN: 0 – 7918 – 4783 – 7, November 5 – 10, 2006, Chicago, Illinois,
US.
- Digvijay Kulshreshtha, Dr. S. A. Channiwala, and
Mr. Saurabh Dikshit, “Numerical
Simulation To Study The Effect Of Divergence Angles On Performance Of Inlet
Diffuser Section Of A Gas Turbine Combustor”, Proceedings of 2nd International Congress on Computational
Mechanics and Simulation, December 8 – 10, 2006, IIT
Guwahati, India.
- Digvijay Kulshreshtha, Dr. S. A. Channiwala
& Saurabh Dikshit, “Failure Analysis of Gas Turbine Combustion Chamber
Using Computational Fluid Dynamics”, Proceedings
of Eighth International Congress of Fluid Dynamics and Propulsion, ICFDP8-EG-174, December 14 – 17, 2006,
Sharm-El-Shiekh, Sinai, Egypt.
- Saurabh Dikshit, Dr. S. A. Channiwala, Digvijay
Kulshreshtha & Kamlesh Chaudhari, “Experimental Investigations of Performance
Parameters of Pressure Swirl Atomizer for Kerosene Type Fuel”, Proceedings of ASME Turbo-expo, 2009: Power
for Land, Sea and Air, GT2009 –
59084, July 8 – 12, 2009, Orlando, Florida,
ISBN 978-0-7918-3849-5.
- Dr. Digvijay Kulshreshtha, Dr. S. A. Channiwala
& Mr. Saurabh Dikshit, “Numerical Simulation as Design Optimization Tool for
Gas Turbine Combustion Chambers”, ASME
Turbo-expo, 2010: Power for Land, Sea and Air, GT2010-22889, June 14 – 18, 2010, Glasscow, Scotland. ISBN 978-0-7918-3872-3
- Mr. J. J. Bhavsar, Mr. Saurabh Dikshit & Mr.
V. K. Matawala, “Design and Experimental Analysis of Spiral Tube Heat Exchanger”,
International Conference on Mechanical and Production Engineering, 2013,
Pune, ISBN 2320 – 2092
- Saurabh Dikshit, Digvijay Kulshreshtha & Dr.
S. A. Channiwala, “Numerical Simulation of Pressure Swirl Atomizer for Small
Scale Gas Turbine Combustion Chamber”, International Conference on Heat
Transfer, Fluid Mechanics and Thermodynamics, July 7 – 9, 2017. Portoroz,
Solvenia.
National
Conference: 05
-
Digvijay B. Kulshreshtha, Dr. S. A. Channiwala
and Saurabh Dikshit, “CFD Analysis and Experimental Investigations for
Optimization of Primary Zone Equivalence Ratio of Tubular Type Combustion
Chamber for Small Gas Turbine Engine” National
Conference on CFD and Power, BHEL, Hyderabad.
- Saurabh Dikshit and Digvijay B. Kulshreshtha,
“Experimental Test on Air Blast Atomizer”, Proceedings of the 22nd
National Conference on IC Engines and Combustion, NIT-Calicut, Kerala, India:
10-13 December, 2011: Paper No:
2-018.
- Saurabh Dikshit and Digvijay B. Kulshreshtha, “Effects
of Swirling Air on Performance of Air Blast Atomizer”, Proceedings of TFMS 2012, National
Conference on Thermal, Fluid and Manufacturing Science, January 20 – 21, 2012 Surat, Gujarat, India: Paper No. TFMS2012 – 0701.
- Saurabh Dikshit and Digvijay B. Kulshreshtha, “Design
and Experiments on Hydrogen Pre - Mix Nozzle”, Proceedings of TFMS 2012, National
Conference on Thermal, Fluid and Manufacturing Science, January 20 – 21, 2012 Surat, Gujarat,
India: Paper No. TFMS2012 – 0702.
- Saurabh Dikshit, Digvijay B. Kulshreshtha, S. A.
Channiwala, “Characteristics Curves of Penetration Length Using Dimensional
Analysis”, Proceedings of TFMS 2014, 2nd National Conference on
Thermal, Fluid and Manufacturing Science, January 24 – 25, 2014 Surat, Gujarat, India: Paper No. 2014TFMS – 0403.
Patent Filed
DESIGN – 01
·
AIR
ASSISTED PRESSURE SWIRL ATOMIZER
Co-inventors: Dr. Digvijay B. Kulshreshtha & Dr.
S. A. Channiwala
PATENTS – 01 (Applied)
·
AIR
ASSISTED PRESSURE SWIRL ATOMIZER FOR GAS TURBINE APPLICATION
Co-inventors: Dr. Digvijay B. Kulshreshtha & Dr.
S. A. Channiwala
Professional Institute Membership
Life time member of Indian Society of Technical Education (ISTE)
Memburship Number : LM 111708
Award
AWARD – 01
The
N K Iyengar Memorial Prize Best Paper Award for Year 2011, Paper Entitled
“Design Methodology of Pressure Swirl Atomizer, Spray Characterization and Drop
Diameter Evaluation using Scanning Electron Microscope for Micro Gas Turbine
Engine”, Published in Institute of Engineers Journal of Mechanical Engineering.